Paper Jam Problems
81
TROUBLESHOOTING
Paper Jams in the Output Area
1.
If the paper is visible from the Main Output Tray,
carefully pull it out
(A)
.
2.
If the jammed paper is not visible or there is resistance
when you pull the paper, open the Face-up Output Tray
(B)
.
3.
Push the tray down so that it is completely open at a 90
degree angle
(C)
.
4.
If there is resistance when you pull the paper, squeeze the
handle on the right end of the exit roller, and then pull
the roller in the direction of the arrow
(D)
.
5.
Remove the jammed paper
(E)
.
6.
Replace the exit roller
(F)
. Make sure the right end of the
roller clicks in place. If the handle is not closed
completely, the printer will indicate a cover open or fuser
error with the red Error light on the Operator Panel.
7.
Close the Face-up Output Tray
(G)
.
8.
Open and close the Top Cover to resume printing
(H)
.
A
B
C
D
E
F
G
H
note:
If the Paper and the Error lights do not
go out, there is still jammed paper inside the
printer. Check the input area and the inside of
the printer.
