38
Chapter 5, Using Print Media
P
RINTING
ON
P
REPRINTED
M
EDIA
You can print on letterhead stationary or preprinted forms
from any of the input trays. Keep the following
considerations in mind:
•
Letterhead must be printed with heat-resistant inks,
which will not melt or vaporize when subjected to the
printer’s fusing temperature of 400° F for 0.1 seconds.
•
Inks must be non-flammable.
•
Paper and ink must both be dry.
Printing on Letterhead
1.
Load letterhead stationary or other preprinted paper into
Tray 1 printed side up
(A)
.
2.
Or load into Tray 2 or 3 printed side down
(B)
. Adjust
the Width Guide properly.
3.
Configure the paper source, type, and size within your
software application in Properties. Choose Preprinted as
your paper type
(C)
.
4.
Print to the Main Output Tray
(D)
. If you are changing
paper sizes and a paper size error shows on the Operator
Panel, press the Go/Continue button.
note:
If you only want the first page of your print job to
print on letterhead, see page 51.
X
press
C
A
D
NEC
B
