LLEXETER.CO.UK
LLEXETER LTD - UNITS 15-18 GREENDALE BUSINESS PARK - WOODBURY SALTERTON - DEVON - EX5 1EW - UNITED KINGDOM
COMPANY NO: 4940600 / VAT REGISTRATION NO: GB825156925 TEL: 01395 233128
2; Wheel Spindle
3; Spindle Bolt (x 2)
4; Left/Right Fork Legs
5; Oil Seal (x 2)
6; Steering Stop Rubber (x 2)
7; Lower Yoke/Steering Column
8; Upper Yoke
9; Pinch Bolts (M5 x 16mm x 7)
10; Spacer x 2
11; Lower Bearing Washer
12; Lower Yoke/Steering Assy
13; Upper Bearing Snap Ring
14; Upper Bearing Washer
15; Stem Spacers
16; Steering Crown Bolt
To remove the Talaria front suspension, it is
necessary to remove the Front wheel and Front brake
caliper.
1. Loosen the upper yoke fork pinch bolt (M5 x
16mm)
When refitting, tighten to 7Nm
2. Loosen the lower yoke pinch bolts (M5 x 16mm)
and lower the fork leg through the yokes.
When refitting, tighten to 10Nm
Tip; Before removing the fork from the lower yoke,
tighten the lower yoke pinch bolts to allow access to
loosen the fork leg cap and remove the steering stop
rubber.
When refitting, tighten the cap to 20Nm
Note; the fork cap uses a 33mm hex socket
For the LEFT side fork leg;
3. Remove the 3 bolts (M5 x 8,,) securing the fork
guard to the lower leg
When refitting, tighten to 5Nm
DNM Suspension;
The DNM Suspension fitted is sold as a complete unit and if major
fault or damage has occurred, replace the assembly. The fork seal,
however, can be replaced along with the suspension fluid.
2.2 Front Suspension & Forks - DNM Forks
