LLEXETER.CO.UK
LLEXETER LTD - UNITS 15-18 GREENDALE BUSINESS PARK - WOODBURY SALTERTON - DEVON - EX5 1EW - UNITED KINGDOM
COMPANY NO: 4940600 / VAT REGISTRATION NO: GB825156925 TEL: 01395 233128
3. Disconnect the rear lighting cables from the
main wiring harness, located above the battery
compartment to the left of the machine.
4. Remove the 2 bolts (M6 x 10mm) from the fairing
panel followed by the 4 bolts (M8 x 20mm) securing
the assembly to the chassis.
When refitting, tighten the M6 bolts to 5Nm
and the M8 bolts to 20Nm.
Caution - the rear assembly will fall from the
machine when the bolts are removed! Take care to
support the assembly when removing the bolts.
7.2 Rear Fairings and Saddle - TL45 On Road
5. Remove the seat under panel by removing the 4
screws securing it to the unit.
Note; this is necessary to remove the seat
from the assembly.
6. Remove the 4 nuts (M6, self locking) and 1 screw
securing the seat to the rear assembly and remove
the seat.
When refitting, tighten the nuts to 5Nm
7. If replacement is required, remove the 2 screws
securing the seat rear fairing panel to the seat unit
and remove the panel.
