Chapter D
Chapter D
Adjustment mode
161
W301-0411E
2.5 Outrigger Length Adjustment
The outrigger adjustment can be performed with four outriggers at the same time, or separately with each
outrigger.
2.5.1 Outrigger Length Zero Adjustment
- Fully retract all four outrigger beams.
- Until "RFront O/R" and "Zero adjustment value" become highlighted on the LCD (Fig. 2.1.1), press the < >
key (backward) or the < > key (forward).
Value ZERO SPAN
RFront O/R [m] 1.281 1.275 3.600
Detected Right Front outrigger length Zero adjustment value
- Operate the <
> key (-) and the < > key (+) so that the detected Right Front outrigger length becomes
the zero adjustment value. When the adjustment length is reached, press the <
> key to register the
adjustment value.
After the adjustment value is registered, " " is shown at the left of zero adjustment value.
- Also for the outrigger length of Left Front, Right Rear, and Left Rear, operate the < > key (backward) and
the < > key (forward) to show the zero adjustment display, and then perform the adjustment and
registration.
Display of Left Front outrigger zero adjustment
Value ZERO SPAN
LFront O/R [m] 1.281 1.275 3.600
Display of Right Rear outrigger zero adjustment
Value ZERO SPAN
RRear O/R [m] 1.281 1.275 3.600
Display of Left Rear outrigger zero adjustment
Value ZERO SPAN
LRear O/R [m] 1.281 1.275 3.600
