Chapter A
Chapter A
Components of AML System
7
W301-0411E
1.2.3 Control switches
Table 1.2.3
No. Name
Description
0
Preset menu key
Used for go to the preset menu.
1
F1 key
Used to select the function shown as “F1” in the pop-up window.
2
F2 key
Used to select the function shown as “F2” in the pop-up window.
3
F3 key
Used to select the function shown as “F3” in the pop-up window.
4
F4 key
Used to select the function shown as “F4” in the pop-up window.
5
Working range limit key
Used to register/cancel the working range limit.
6
Counterweight set key
Used to select the mass of the mounted counterweight on AML.
7
Rope part line key
Used to select the number of part lines on AML.
8
Lift state select key
Used to select the lift state (boom, jib in various length and offset angle)
on AML.
9
Outrigger state select key
Used to select the outrigger extension width on AML.
10
Exit key
Used to close the pop-up window.
11
Display change key
Used to change the display content.
12
Set key
Used to confirm (register) the selected state.
13
Check key
Used during pre-operational inspection.
