71
6
SwyxPhone for Experts
This chapter contains information about the use of special functions which go beyond “normal”
telephoning, such as conference calls or the allocation of project codes, for example.
S
Please note that in this section, function keys which are not assigned in the default setting of
your SwyxPhone will also be mentioned. For further information please refer to chapter 7.6,
Configuration of Function Keys
6.1
Disabling Lines (Wrap-up Time)
You can specifically block a line for further incoming calls, for example, in order to have
enough time to process a customer inquiry after a call from a customer. Your SwyxPhone is then
busy for further incoming calls. If you would always like to have a wrap-up time configured for
a line, you must define this when configuring the line (see chapter 7.5,
1.
Press the corresponding Line button.
The LED will glow.
2.
Activate the option “Disable line” and confirm this with
9
.
The line is disabled, the LED glows with short interruptions.
1.
This is how you enable a disabled line
1.
Keep the line button pressed for a few seconds.
The LED stops glowing, the line is once again clear for incoming calls.
L1: idle, please dial!
Voicemail inquiry
Caller list
Phonebooks
Redial list
Incognito now
Disconnect
Disable line
Call swap
Enable Line
Summary of Contents for SwyxPhone L420
