Swyx SwyxPhone L420, User Documentation

Page: 58 / 164

Telephoning with SwyxPhone 58
This is how you call swap using the configured "Call Swap" button
1. Press the button “Call Swap”.
You have now activated the next line.
2. Repeatedly pressing the “Call Swap” button will successively activate all of the active lines.
The activation of the corresponding line will be delayed. The subscriber data will appear on
the display first, so that you can quickly “run through” all of the subscribers. Alternatively,
you can immediately press the corresponding Line button. The line currently active is
highlighted.
You can have as many calls simultaneously as you have lines. This means, however, that you
have several calls on hold and one active line at the most.
5.10 How do I connect two subscribers to one another?
You are connected with two subscribers simultaneously. While you are talking to one of the
subscribers, the other is
on hold . The subscriber will hear music on hold. You can now connect
these two subscribers to each other.
Example:
You are talking to Subscriber A on Line 1. Line 2 has a connection on hold with
Subscriber B. You connect Subscriber A with Subscriber B. Then both of your lines are
free again (inactive).
This is how you connect two subscribers
1. Press the button “Call Transfer” (default: “Call transfer” function key).
If only one further connection is on hold, the two subscribers are immediately connected.
2. If you have put several calls on hold, you will be offered all the lines on hold for connection
to the active line. Select the subscriber you want and confirm this with
9
.
The subscribers are now connected to one another. Both lines become inactive.
If you have created a second line (active line), for example for an Inquiry Call, you can connect
these two lines by putting the handset on hook or by pressing the Speaker button. If you were
called on this line, this connection will be terminated if you put the handset on hook or press the
Speaker button. The line previously on hold will once again be active.
Call Swap using a
Configured Button
Connecting
Subscribers
Connect to
<Subscriber>
<Subscriber>
0
Back