Configuration of Line Buttons
115
If an outgoing call is started or if the Line button is pressed during this wrap up time, the line
will once again be cleared afterwards for incoming calls.
If you would like to disable incoming calls to a line from time to time, you can define this using
the menu of the assigned Line button (see chapter 6.1,
The Number of Available Lines
The number of available lines always corresponds to the number of configured Line buttons, i.e.
to change the number of lines, you must either add or remove Line buttons accordingly. The
configuration of Line buttons is identical to the configuration of function keys (see chapter 7.6,
Configuration of Function Keys
This is how you configure a Line button
1.
Go in the main menu to the menu item “8 > Configuration” and confirm your selection with
9
.
The Settings menu will appear.
2.
Then, in the Configuration menu, go to the menu option “3 > Lines”.
In the display you will see “Lines” and the number of existing lines. The number of available
lines will be shown in the menu. The default setting is always two lines.
3.
Move the arrow buttons to the line you would like to configure.
4.
Confirm your selection with
9
.
The line abbreviation, the line number, and the extension will appear in the first line of the
display. Here you have the option of entering an extension for outgoing or incoming calls.
Select the desired option and confirm this selection with
9
.
Configuring a Line
Button
Lines (Number: 02)
Line 01
Line 02
0
Back
L01: Extension
1
Incoming calls
2
Outgoing calls
3
Wrap-up time = <Status>
0
Back
Summary of Contents for SwyxPhone L420
