Swyx SwyxPhone L420, User Documentation

Page: 114 / 164

SwyxPhone Settings 114
This is how you delete the Redial List
1. If the list is no longer up-to-date, it can be deleted at any time by confirming the entry
“1 > Clear list” with
9
.
If there are no entries in the list, the message “No entry” will appear.
The entire list will be deleted.
For further information please refer to chapter 5.2, Other Options for Calling a
Number , page 51.
7.4.6 Lists for Callback Requests, My Callback Requests and Missed Callbacks
In the “Callback Requests” list you will find all callbacks that have been directed to you. In the
“My Callback Requests” list you will find all callbacks that you have requested yourself. In the
“Missed Callbacks” list you will find all callbacks on busy, which were prompted because the
person called had finished his conversation, but were not confirmed by you.
7.5 Configuration of Line Buttons
The number of lines usually corresponds to the number of existing Line buttons. In the default
setting, you have two pre-configured Line buttons and, therefore, you have been provided with
two lines which means that you can receive a maximum of two calls. You can configure up to
nine lines. The least number of lines is, however, always two, even if you have only configured
one or none of the Line buttons. Each individual line can be assigned its own extension and be
configured according to its use.
Due to the fact that both SwyxPhone and SwyxIt! access the same user settings, any changes
you make on SwyxPhone will always effect the settings in SwyxIt! and vice versa. Above all,
you should keep in mind that if you delete lines or Speed Dials, the data will be lost!
For further information please refer to chapter 8, Interaction with SwyxIt! , page 127.
Configuration of the Individual Line Buttons
You can define numbers for incoming and outgoing calls for the available lines. This requires
that your user account has been assigned at least two numbers (or group numbers).
The option “Incoming calls” shows the telephone number the caller has dialed, when the call
comes in on this line. Under the option “Outgoing calls”, you can specify the telephone number
to be used for making outgoing calls from this line.
Furthermore, for each configured Line, you can define whether this line should be blocked for
specific period of time after an incoming is received.
Delete Redial List
Redial 00/YY
1
Clear list
0 Back
<Number/Name> <Time>
<Number/Name> <Time>
...
<Number/Name> <Time>