Svantek Shawcity SVAN 977C, User Manual

Page: 169 / 343

169
SVAN 977C User Manual - Appendixes
The instrument outputs in this case a file containing all control settings given in Tab. A1
in the format:
#1,Xccc,Xccc,(...),Xccc;
Note: All bytes of that transmission are ASCII characters.
A.2. F
UNCTION
#2
–
R
EAD OUT OF THE MAIN MEASUREMENT RESULTS
#2 function enables one to read out the current measurement results from the selected profile.
#2 function has the formats defined as follows:
#2 [,<aver>] [,<profile>] [[[ ,X? ] ,X? ] ,(...) ];
or
#2 [,<aver>] ,<rot>;
where:
<aver>
– type of results:
i
– instantaneous results, i.e. results from the current cycle (default),
a
– averaged results, i.e. results from the previous cycle.
<profile>
– profile number:
0
– means “all profiles”, i.e. results from the all profiles will be sent (default value),
1, 2 or 3
– one of the profile, i.e. only results from the given profile will be sent;
<rot>
– rotation results:
rpm
– all rotations results will be sent (unit of the results wil be [rpm]),
rps
– all rotations results will be sent (unit of the results wil be [rps]);
X
– code of the specified result (see below); if no code are specified all results will be sent;
In case of <profile> = 1, 2 or 3 the instrument sends results in the format defined as follows:
#2 [,<aver>],<profile>,Xc,(...);
where c is the value of the result X or question mark ( ? ) if result X is not available;
In case of <profile> = 0 the instrument sends results in the format defined as follows:
#2 [,<aver>],1,Xc,(...),2,Xc,(...),3,Xc,(...),;
where c is the value of the result X or question mark ( ? ) if result X is not available;
If no results are available, the instrument will send:
#2,?;