Svantek Shawcity SVAN 977C, User Manual

Page: 144 / 343

144
SVAN 977C User Manual
Slope + Type of trigger that starts the measurement/integration
by the duration of the
Integration Period on condition:
rising value of the RMS result ( Source ) integrated during
0,5 ms passes above the threshold value (Level).
Chapter
4.2
Slope -
Type of trigger that starts the measurement/integration
by the duration of the
Integration Period on condition:
falling value of the RMS result ( Source ) integrated during
0,5 ms passes below the threshold value (Level).
Chapter
4.2
Level + Type of trigger that starts the 1-second measurement/
integration on condition: value of the RMS result (
Source )
integrated during 0,5 ms is greater than the threshold
value (
Level ). In other cases, the instrument continues
checking the trigger condition every 0,5 mc. During one
measurement cycle the instrument performs as many 1-
second
integrations as many seconds the
Integration Period consists and stops the measurement
cycle.
Chapter
4.2
Level - Type of trigger that starts the 1-second measurement/
integration on condition: value of the RMS result (
Source )
integrated during 0,5 ms is lower than the threshold value
(
Level ). In other cases, the instrument continues
checking the trigger condition every 0,5 mc. During one
measurement cycle the instrument performs as many 1-
second
integrations as many seconds the
Integration Period consists and stops the measurement
cycle.
Chapter
4.2
Grad + Type of trigger that starts the 1-second measurement/
integration on condition: value of the RMS result (
Source )
integrated during 0,5 ms is greater than the threshold
value (Level) and the gradient of this Source is greater
than the threshold level (
Gradient ). In other cases, the
instrument continues checking the trigger condition every
0,5 mc. During one measurement cycle the instrument
performs as many 1-second integrations as many
seconds the
Integration Period consists and stops the
measurement cycle.
This type of trigger has the same logic as Level + trigger,
but the trigger condition requires also gradient level to be
exceeded.
Chapter
4.2
External Type of trigger that starts the measurement/integration
when the trigger signal appears on the I/O socket of the
instrument. After the measurement/ integration start from
the trigger, the measurement/integration will continue by
the
Integration Period .
Chapter
4.2
Source Measured result that is compared with the threshold
value (Level) for triggering
– RMS measured in the first
profile: Leq(1) in sound modes and RMS(1) in vibration
modes.
Chapter
4.2