Svantek Shawcity SVAN 977C, User Manual

Page: 154 / 343

154
SVAN 977C User Manual
Ambient noise Screen that enables setting the ambient noise distortions
in the way of sound pressure in the 1/1-octave bands with
central frequencies from 125 to 8000 Hz. This screen is
connected with the STIPA function. Chapter
13.4.5
Alarms Instrument's function, enabling alarm setting, generation
and alerting. The alarm setting can be done through the
+ software. If
Alarms were defined the they can
be seen in the instrument's screens. Some terms, used
in the + software, are presented below:
Chapter
4.11
Alarm Conditions List of alarm conditions. Alarm condition can be a
Threshold or Time type.
Chapter
4.11
Threshold Alarm condition type. Alarm is generated if the selected
result (
Leq, Lpeak, Lmax, Lmin or sliding Leq for screens
of 15 or 60 minutes) exceeds the threshold level.
Chapter
4.11
Time Alarm condition type. Alarm is generated in the selected
days of the week and during the defined time period. Chapter
4.11
Event Event that generates alarm based on combination of
Threshold and Time conditions. For each event, a
different type of Action can be set.
Chapter
4.11
Action Type of action in case of alarm: marker, audio, external
I/O, SMS text message, or e-mail. Chapter
4.11
16.5 D
ISPLAY PARAMETERS
Name Description Screen Reference
Display Section of the Main Menu that enables setting of the
measurement views. Chapter
5
Display Mode Mode of measurement results presentation/view. Modes
can be activated in the
Display Modes screen.
Chapter
5.1