Svantek Shawcity SVAN 977C, User Manual

Page: 44 / 343

44
SVAN 977C User Manual
Detector for statistics
The Statistics parameter defines the method for calculation of statistical results
Ln . Statistics for profiles will be calculated based on RMS results with linear
detector ( Lin ) or exponential detector ( Exp ), e.g. Impulse , Fast or Slow ,
defined in the Profiles list, regardless of how main results are measured.
Default value: Lin .
Day time limits
The Day Time Limits parameter defines the day and night-time limits required
by the local standards. These limits are used for the calculation of the Lden
function (see Appendix D for definition). Two options are available: 6h-18h and
7h-19h . Default value: 6h-18h .
Rolling Leq
The Rolling Time(x)
parameter defines „time window” for the "Rolling RMS"
calculation. The Rolling Leq are presented as LR+<time window>. For example,
if the
Rolling Time is equal to 30 minutes, the appropriate result will be named
as LR30 and will be calculated each second as Leq of last 30 minutes. If the
Rolling Time is in seconds, for example is equal to 50s, the result name will
have letter "s" ( LR50s ), to make it different from 50 minutes LR result ( LR50 ).
Default values: 30 m and 1 h .
Note: In case of vibration measurements, positions Statistics, Day Time Limits and Rolling Time(x)
are not presented in the General Settings list
.
You can easily access the
General Settings screen during the
measurement performance from the result
view. It is necessary to enter some result
field (for example,
RMS
) with the ▲ / ▼ or
◄ / ► key and press
<ENTER> .
<ENT>
4.2 S
ETTING MEASUREMENT TRIGGER
–
M
EASUREMENT
T
RIGGER
The Measurement Trigger list allows you
to set parameters of the measurement
trigger, that switches the measurement
process in case the trigger condition is met.
The Measurement Trigger can be
switched Off or On by selecting its type in
the Trigger position. Default value: Off .
<ENT>
Trigger is switched on if one of its six available modes is selected in the Trigger position: Slope + , Slope
–
,
Level + , Level
–
, Grad + or External . When the trigger is selected, additional parameters can be defined: the
measurement result that is checked for a trigger condition ( Source ), its threshold value ( Level ) and the rate of
its changing ( Gradient ).