Svantek Shawcity SVAN 977C, User Manual

Page: 41 / 343

41 SVAN 977C User Manual
4 CONFIGURING MEASUREMENT PARAMETERS
– Measurement
The Measurement section groups items of
the menu related to configuration of
measurement parameters.
<ENT>
The Measurement list contains the following positions:
General Settings allowing you to set general measurement parameters;
Measurement Trigger allowing you to set the measurement trigger;
Profiles allowing you to program the profile parameters;
Logging allowing you to program the logging function;
Spectrum allowing you to set the spectrum parameters. This position appears in the 1/1 or
1/3 octave functions;
FFT allowing you to set the FFT parameters. This position appears in the FFT
function;
RT60 allowing you to set the RT60 parameters. This position appears in the RT60
function;
STIPA Settings allowing you to set the STIPA parameters. This position appears in the STIPA
function;
Ambient noise allowing you to set the ambient noise levels. This position appears in the STIPA
function;
Compensation allowing you to switch on the required compensation filter;
Range allowing you to select the correct measurement range;
RPM Measurement allowing you to set the RPM measurements parameters;
Exposure Time allowing you to set the daily exposure time for dose measurements;
Statistical Levels allowing you to define 10 statistical levels;
Timer allowing you to programme the delayed start timer;
Alarms allowing you to check the status of the advanced alarm function. This position
appears if the ALARM.SVA file is uploaded to the predefined SYSTEM
catalogue.
The content of the Measurement list depends
on settings of Mode and
Measurement Function . Examples for two
different modes and measurement functions
are attached.
Any parameter in the Measurement list can be changed only when the
instrument is not currently executing a measurement. The parameters are
displayed with grey colour. The blinking „measurement” icon indicates that the
instrument is performing a measurement.