Svantek Shawcity SVAN 977C, User Manual

Page: 50 / 343

50
SVAN 977C User Manual
In the time edition line, you may define hour
and minute of the split operation and switch
on (

) or off (

) the current split.
After pressing <ENTER> the Split Time X
list will show the active times of the day
when the logger will be split.
<ENT>
4.4.2 Selecting results for logging
– Logger Results
In the Logger Results list, you can select
results for three independent profiles ( Peak ,
Max , Min , Leq , LXY , LR1 and LR2 for
Sound measurements and Peak , P-P , Max
and RMS for Vibration measurements) and
results taken from the weather station
(
Meteo ), which will be logged in a logger file
with the Logger Step .
Activation / deactivation can be done with
the
◄ / ► key pressed together with
<Alt> .
<ENT>
Note: When Logger is disabled or no Logger results were selected, the logger plot cannot be
activated in Display Modes
and therefore doesn’t appear on the display.
When Logger is enabled and results for
logging selected, the logger plot will be
available in measurement views.
<Alt/
▲
>
4.4.3 Selecting additional summary results for saving
– Summary Results
The Summary Results list allows you to
include/exclude logging of some summary
results,
like: Statistics , Meteo ,
Statistics Spectrum , Max Spectrum and
Min Spectrum for Sound measurements
and Meteo , Max Spectrum and
Min Spectrum for Vibration measurements.
Default modes: all enabled.
<ENT>
Note: Meteo results are transmitted to the instrument from the weather station connected to the
SV 277 monitoring station.
4.4.4 Configuring Logger trigger
– Logger Trigger
In the Logger Trigger list, you can
configure the way the logger results will be
registered in the logger file. It is a context list
in which: the trigger can be disabled (
Off ) or
enabled by selecting its type ( Level+ or
Level- ) in the Trigger position. Default
value: Off .
<ENT>