Svantek Shawcity SVAN 977C, User Manual

Page: 281 / 343

281
SVAN 977C User Manual - Appendixes
C.5. M
ISCELLANEOUS SPECIFICATION OF
SVAN 977C
Display
Super contrast OLED colour display (320 x 240 pixels).
Memory
2 MB RAM memory.
4 MB flash memory allocated to the program.
Memory card
Typical Micro SD or Micro SDHC cards can be used. Supported for up to 128 GB (provided that card was
formatted as FAT32).
Note: The originally supplied Kingston Industrial memory card has been tested by SVANTEK and
cards of this type are strongly recommended for use when the original card is going to be replaced.
MicroSD contact pad assignment - outer view
Table C.5.1. Pin out of the MicroSD contact
Pin No. Name Description
1 DAT2 Data Line [Bit 2]
2 CD/DAT3 Card Detect / Data Line [Bit 3]
3 CMD Command / Response
4 V
DD
Supply voltage
5 CLK Clock
6 V
SS
Supply voltage ground
7 DAT0 Data Line [Bit 0]
8 DAT1 Data Line [Bit 1]
Signal input
The input of the measured signal (taken form the microphone preamplifier or the vibration transducer):
TNC connector (external view)
Table C.5.2. Pin out of the TNC connector
Pin number TNC
Central Input
Shield Ground