Suzuki Wagon R RB310, Supplementary Service Manual

Page: 243 / 254

10B-90 AIR BAG SYSTEM
18) Disconnect adapter cable (special tool) from air bag (inflator)
module or seat belt pretensioner as soon as possible. This
will prevent adapter cable (special tool) from damage due to
possible contact with hot air bag (inflator) module or hot seat
belt pretensioner.
19) Check adapter cable connector as follows.
• For air bag (inflator) module
Air bag (inflator) module connector of adapter cable (special
tool) are designed to be reused. However they should be
inspected for damage after deployment. Replace it with new
adapter cable (special tool), if necessary.
• For seat belt pretensioner
Seat belt pretensioner connector of adapter cable (special
tool) should be inspected for damage when seat belt preten-
sioner is activated. Replace it with spare connector (special
tool), if necessary.
20) Dispose of deployed air bag (inflator) module (1) or activated
seat belt pretensioner (2) through normal refuse channels
after it has cooled for at least 30 minutes and tightly seal air
bag (inflator) module (1) or seat belt pretensioner (2) in
strong vinyl bag. (Refer to “Deployed Air Bag (Inflator) Mod-
ule and Activated Seat Belt Pretensioner Disposal” in detail.)
21) Wash your hands with mild soap and water afterward.
22) Ensure that deployment harness has been disconnected
from 12 volts vehicle battery and that its two banana plugs
have been shorted together by fully seating one banana plug
into the other.
23) Disconnect deployment harness and adapter cable (special
tool) from air bag (inflator) module and seat belt preten-
sioner.
24) Temporarily store undeployed air bag (inflator) module or
inactivated seat belt pretensioner referring to “Service Pre-
cautions” for details.
25) Contact your local distributor for further assistance.
NOTE:
Do not reuse faulty seat belt pretensioner connector of
adapter cable (special tool) because it can be destroyed
by shock when seat belt pretensioner is activated.
1
2
NOTE:
Remaining steps are to be followed in the unlikely event
that air bag (inflator) module did not deploy or seat belt
pretensioner did not activate.