Suzuki Wagon R RB310, Supplementary Service Manual

Page: 238 / 254

AIR BAG SYSTEM 10B-85
6) Set air bag (inflator) module or seat belt pretensioner as fol-
lows.
• For driver air bag (inflator) module
a) Clear space (3) on ground about 185 cm (6 ft) in diameter
where driver air bag (inflator) module (1) for deployment.
Paved, outdoor location where there is no activity is pre-
ferred. If outdoor location is not available, space on shop
floor where there is no activity and provide sufficient ventila-
tion. Ensure no loose or flammable objects are within
deployment area.
b) Place driver air bag (inflator) module (1) with its vinyl trim
cover facing up (2) on ground in step i).
WARNING:
• For handing and storage of air bag (inflator) module
and seat belt pretensioner, select place where ambient
temperature below 65°C (150°F), without high humidity
and away from electric noise.
• Always carry live air bag (inflator) module with trim
cover away from you.
• When storing live air bag (inflator) module or when
leaving live air bag (inflator) module unattended on
bench or other surface, always face air trim cover up
and away from surface. As live passenger air bag (infla-
tor) module must be placed with its trim cover facing
up, place it on workbench with slit (1) or use workbench
vise (2) to hold it securely at its lower mounting bracket
(3).
• This is necessary so that free space is provided to allow
air bag to expand in the unlikely event of accidental
deployment.
• Never carry seat belt pretensioner by webbing.
• When placing live seat belt pretensioner on workbench
or other surface, be sure not to put something on seat
belt pretensioner.
Failure to follow procedures may result in personal injury.
3
2
3
1