Disabling air bag system
1) Turn steering wheel so that vehicle's wheels (front tires) and
pointing straight ahead.
2) Turn ignition switch to “LOCK” position and remove key.
3) Remove “AIR BAG” fuse from circuit fuse box referring to
“System Components and Wiring Location View and Con-
nectors” in this section.
4) Remove steering column upper and lower covers.
5) Disconnect connector (1) of contact coil and combination
switch assembly as follows.
a) Release locking of lock lever (2).
b) After unlocked, disconnect connector.
6) If equipped with passenger air bag (inflator) module, remove
glove box and disconnect Yellow connector (3) of passenger
air bag (inflator) module.
a) Release locking of lock lever (4).
b) After unlocked, disconnect connector.
7) If equipped with side air bag (inflator) module, disconnect
Yellow connector (5) of side air bag (inflator) module under
front seat cushion (6).
a) Release locking of lock slider (7).
b) After unlocked, push down lock slider (7) and disconnect
connector.
NOTE:
With “AIR BAG” fuse removed and ignition switch ON,
“AIR BAG” warning lamp will be ON.
This is normal operation and does not indicate a air bag
system malfunction.
Summary of Contents for Wagon R RB310
