Suzuki Wagon R RB310, Supplementary Service Manual

Page: 244 / 254

AIR BAG SYSTEM 10B-91
Deployment/Activation Inside of Vehicle
When vehicle will be destroyed, or salvaged for component parts,
deploy air bag modules and/or activate seat belt pretensioners
installed on vehicle.
1) Turn ignition switch to “LOCK” position, remove key and put
on safety glasses.
2) Remove all loose objects from front seats and instrument
panel.
3) Disconnect air bag (inflator) module or seat belt pretensioner
connector as follows.
a) For driver air bag (inflator) module
Remove steering column upper and lower covers, then dis-
connect contact coil connector (1) located behind steering
wheel.
b) For passenger air bag (inflator) module
Remove glove box from instrument panel and disconnect
passenger air bag (inflator) module connector (2).
c) For seat belt pretensioner
Remove both side (driver and passenger side) center pillar
lower trims and disconnect seat belt pretensioner connec-
tors (3).
d) For side air bag (inflator) module
To turn over driver and passenger side seat back trims (5)
and disconnect side air bag (inflator) module connectors
(4).
4) Confirm that each air bag (inflator) module/seat belt preten-
sioner is securely mounted.
[A] : For driver air bag (inflator) module
[B] : For passenger air bag (inflator) module
[C] : For seat belt pretensioner
[D] : For side air bag (inflator) module