Suzuki Jimny, Manual

Page: 374 / 476

6-55
INSPECTION AND MAINTENANCE
78RB1-01E
78RB07041
(3) Retainer
4) If the new blade is provided without the
two metal retainers, move them from
the old blade to the new one.
5) Install the new blade in the reverse
order of removal, with the locked end
positioned toward the wiper arm. Make
sure the blade is properly retained by
all the hooks. Lock the blade end into
place.
6) Reinstall wiper frame to arm, making
sure that the lock lever is snapped
securely into the arm.
For rear windshield wipers:
78RB07047
(1) Lock end
(2) Blade rubber
1) Lift the rear wiper arm a little from the
rear window. Remove the wiper frame
from the rear wiper arm by pushing the
lock end (1) from the side of wiper
blade frame and then by pushing the
wiper frame to the direction of the arrow
with the lock end (1) free from locking in
the above illustration.
NOTE:
Return the rear wiper arm slowly after
removing the rear wiper blade.
77R60050
(3) Stopper
(4) Hook
(5) Retainer
2) Pull and remove the wiper blade rubber
from the wiper frame until the stopper
(3) of the wiper frame is taken out of the
hook (4). Remove the retainers (5) from
the wiper blade.
(3)
(3)
(1)
(2)
(3)
(5)
(4)