Suzuki Jimny, Manual

Page: 192 / 476

3-39
OPERATING YOUR VEHICLE
78RB1-01E
Traffic sign recognition
(if equipped)
When the vehicle with the dual sensor
passes the traffic sign, the traffic sign is
shown on the information display on the
cluster meter in order to notify the driver.
78RB03038
NOTE:
• The traffic sign may be shown with delay
on the information display depending on
the circumstances and conditions of the
vehicle
• The number of the traffic sign for this
function shows up to three signs on the
information display
• The traffic signs are disappeared on the
information display under the following
situations
– When the vehicle was run in constant
distance after showing the traffic signs
on the information display (except for
regulation end sign),
– When a period of time passed after the
traffic signs on the information display
(only for regulation end sign),
– When turning right or left with the turn
signal lights blinked,
– For manual transmission vehicle, the
gearshift lever is in “R” position, for
automatic transmission vehicle, the
gearshift lever is in “P” or “R” position
(except for speed limit sign).
• To change the traffic sign recognition
setting, select “Sign recog.” in “Setting
mode” on the information display. Then,
select “ON” or “OFF”
• When the ignition switch was turned
“OFF” with the speed limit sign shown on
the information display and then the igni-
tion switch is turned “ON” again, the
information display shows the same
speed limit sign the last time the ignition
switch was turned “OFF”
• When you drive in the area where unit of
velocity is changed, the traffic signs may
not be appeared or the different traffic
signs may be appeared on the informa-
tion display after passing the actual traf-
fic signs. This is not a malfunction. The
display will be resumed after driving for a
while.
• The speed limit sign on the information
display that is higher or lower than the
actual limited speed sign may be dis-
played for the speed limit sign
WARNING
The function of the traffic sign recog-
nition has limits and may not func-
tion properly depending on the
driving conditions of circumstances.
Do not rely excessively on this func-
tion and always drive in a safe man-
ner.