Suzuki Jimny, Manual

Page: 124 / 476

2-51
BEFORE DRIVING
78RB1-01E
LED headlight warning light
(if equipped)
54P000234
When the ignition switch is turned “ON”,
this light comes on briefly so you can
check that the light is working.
If this light comes on, there is a problem
with the LED headlight. Park the vehicle in
a safe place and consult a SUZUKI dealer
to have the problem corrected.
High beam assist warning light
(orange) (if equipped)
52RM20690
When the ignition switch is turned “ON”,
this light comes on by orange briefly so
you can check that the light is working.
For details, refer to “Dual sensor brake
support (if equipped)” in “OPERATING
YOUR VEHICLE” section.
In the following situations, this light will
come on by orange and the dual sensor
brake support will stop functioning when
the ignition switch is “ON”.
When the dual sensor is faulty, the function
of the dual sensor stops until the ignition
switch is turned to LOCK position. Find a
safe place to park and turn the ignition
switch to “LOCK” position. Restart the
engine, and check that the dual sensor
brake support indicator light, lane depar-
ture warning indicator light and high beam
assist warning light go off.
• If the dual sensor brake support indicator
light, lane departure warning indicator
light and high beam assist warning light
stay on after restarting the engine, there
may be a failure of the dual sensor. Ask
a SUZUKI dealer to have the dual sen-
sor inspected.
Under the following situations, the function
of the dual sensor stops temporarily. When
the situations are improved, the temporary
stop of the function will be canceled.
• When the visibility of the dual sensor is
poor.
• When the temperature of the body of
dual sensor is high.
• When the systems related to the dual
sensor brake support stops temporarily.
• When the battery has a voltage abnor-
mality.
NOTE:
If the function of the dual sensor stops
temporarily, high beam assist also stops
temporarily.