Suzuki Jimny, Manual

Page: 196 / 476

3-43
OPERATING YOUR VEHICLE
78RB1-01E
• When the direction of traffic sign is
changed,
• When the traffic sign is aimed diagonally
to the vehicle,
• When the signboard, the poster or traffic
information signboard is installed on the
top or bottom of it,
• When the object as mud, snow or the ice
is attached on the traffic sign,
• When there is a traffic sign on a corner
or a curve,
• When there is a traffic sign where light of
the headlight is hard to reach,
• When the traffic sign is hard to recognize
due to the illumination on the roads or
the shadow of the building,
• When the size of the traffic sign is small,
• When the traffic sign is a lighting type,
• When the traffic sign is assimilated into
the building on the background and it is
hard to recognize the traffic sign,
• When there is a hidden or rubbed part
on the traffic sign and the traffic sign is
hard to recognize,
• When the traffic sign is reflected by the
strong light (for example, backlight or
headlight) and the dual sensor cannot
detect accurately,
NOTE:
There may be a possibility to detect the
supplemental mark inaccurately or not to
detect it as the traffic sign by the situations
around the vehicle.
Handling dual sensor
78RB03012
(1) Dual sensor
(1)
WARNING
The detection performance of the
dual sensor has limits and the dual
sensor cannot detect all vehicles,
pedestrian, object of the high beam
assist (such as the lights of the vehi-
cle in front of you, street lamps, etc.),
partition lines or traffic sign. Do not
rely excessively on the system and
always drive in a safe manner.
• Observe the following instructions
in order to keep the dual sensor
functioning properly. If mishandled,
the dual sensor cannot accurately
detect a vehicle, a pedestrian, an
object of the high beam assist
(such as the lights of the vehicle in
front of you, street lamps, etc.) or
partition lines in front of you, the
system will not function properly
and unexpected accidents may
occur.
– Do not touch the lens of the dual
sensor.
– Do not clean the lens of the dual
sensor by yourself.
– Do not strike the body of, or any
surrounding parts of the dual
sensor.
(Continued)