Suzuki Jimny, Manual

Page: 244 / 476

5-7
OTHER CONTROLS AND EQUIPMENT
78RB1-01E
The accessory socket will work when the
ignition switch is in “ACC” or “ON” position.
This socket can be used to provide 12 volt/
120 watt/10 ampere power for electrical
accessories. Check that the rubber cap
remains on the socket when the socket is
not in use.
USB socket (if equipped)
78RB05014
Connect your portable digital music player,
etc. to this socket to enjoy music through
the vehicle’s audio system. Refer to “Audio
system (Type A / Type B) (if equipped)” in
this section.
NOTICE
• To prevent the fuse from being
blown, when using sockets at the
same time, do not exceed the total
combined power capacity of 12
volt/120 watt/10 ampere.
• Use of inappropriate electrical
accessories can cause damage to
your vehicle’s electrical system.
Check that any electrical accesso-
ries you use are designed to plug
into this type of socket.
• Check that the cap remains on the
socket when the socket is not in
use.
• When the ignition switch is in
“LOCK” position during using the
accessory socket, the following
accidents may occur;
– the audio or navigation system
does not turn off.
– the keyless entry system does
not work, etc.
If they occur, disconnect the item
from the accessory socket and check
whether the electrical equipments
work properly.
If the problem persists, ask a SUZUKI
dealer to have the system inspected.
NOTICE
Always close the cover when not in
use, since entry of foreign material,
dust, water, conductive liquids may
damage the audio system or USB
device.