Suzuki Jimny, Manual

Page: 101 / 476

2-28
BEFORE DRIVING
78RB1-01E
To switch to the setting mode
1) Push and hold the information switch
(1) when the vehicle is stationary.
2) After the display of setting mode is
shown, select the setting item that you
want to change by turning the indicator
selector knob (2) left or right. Refer to
“Setting mode” in this section for
details.
NOTE:
If you switch to the setting mode while
either of the following items is shown on
the information display, the current value
will be reset. If you do not want to reset its
value, push the indicator selector knob (2)
quickly beforehand and switch to the other
item.
• Average fuel consumption
• Driving time
• Average speed
To exit the setting mode
1) To exit the setting mode, select “Back”
and push the indicator selector knob
(2).
2) Push the information switch (1) quickly.
NOTE:
You can exit the setting mode by either of
the following operations:
• Turn the ignition switch to “ACC” or
“LOCK” position.
• Start driving your vehicle.
Information display
The information display is shown when the
ignition switch is in “ON” position.
78RB02033
(1) Information display
78RB02039
(2) Trip meter selector knob
(3) Indicator selector knob
The information display shows the follow-
ing information.
Display (A)
Clock
Display (B)
Thermometer
Display (C)
Warning and indicator messages / Fuel
consumption / Driving range / Average
speed / Driving time
Display (D)
Selector position (for Automatic transmis-
sion models) / Gear position (for Automatic
transmission models) / Gearshift indicator
(if equipped)
(1)
(A) (B)
(C)
(D)
(E)
(F)
(G)
(3)
(2)