Suzuki Jimny, Manual

Page: 197 / 476

3-44
OPERATING YOUR VEHICLE
78RB1-01E
WARNING
(Continued)
– Do not remove or disassemble
the dual sensor.
– Do not stick or affix anything to
the lens of the dual sensor, not
even clear items.
• When the windshield around the
dual sensor is deformed or dam-
aged, or the windshield in front of
the dual sensor is cracked because
of an accident, the dual sensor can-
not detect an obstacle in front of
you, a pedestrian, an object of the
high beam assist (such as the
lights of the vehicle in front of you,
street lamps, etc.) or partition lines
properly. If driving with these dam-
aged parts, the dual sensor brake
support will not function properly
and unexpected accidents may
occur. Operate the dual sensor
brake support OFF switch to turn
off the dual sensor brake support,
and ask a SUZUKI dealer to have
them inspected.
(Continued)
WARNING
(Continued)
• Do not apply any accessories
(other than SUZUKI genuine acces-
sories), films or stickers to the area
listed below. These may affect with
visibility of the dual sensor. If the
area of the dual sensor is
obstructed, the dual sensor cannot
detect any vehicles, pedestrians,
objects of the high beam assist
(such as the lights of the vehicle in
front of you, street lamps, etc.)
properly and the dual sensor brake
support may not function properly.
Also, if applying them to an area
other than the prohibited area, it
may affect with the function of the
dual sensor by reflection of light or
an image. In this case, move them
to another place.
– On windshield
WARNING
• Do not remove or disassemble
laser sensor parts of dual sensor.
• Do not look into irradiation portion
of dual sensor by using the optical
instrument such as magnifying
glass, the objective glass, etc at
distance within 10 cm (3.9 inch)
from dual sensor when the ignition
switch is turned to “ON”. Your eyes
might be damaged by laser.