3-37
OPERATING YOUR VEHICLE
78RB1-01E
Other than the described above, the dual
sensor cannot be detected the vehicle in
front of you or light source, and there is a
case where high beam assist may not acti-
vate properly.
Refer to “Situations where the dual sensor
may not activate properly” in this section
for details.
Under the following situations, switch
high beam or low beam manually.
• When switching back and forth between
the high beams (main beams) and low
beams frequently
• When there is a problem using the high
beams (main beams)
• When it is considered disturbing to other
drivers or pedestrians
There is a case where high beams (main
beams) is switched to low beams by the
fog lights of the vehicle in front of you.
Street lights, traffic signals, and illumina-
tion of billboards or signs may cause the
high beams (main beams) to switch to the
low beams, or low beam to remain on.
Dual sensor brake support OFF
switch
You can turn off the dual sensor brake sup-
port system.
• In the following situations, push and hold
the dual sensor brake support OFF
switch as unexpected dangers may be
possible if it is activated.
– When the vehicle is placed upon a tes-
ter such as when undergoing a vehicle
inspection
– When the vehicle is put up on a lift,
and the tyres are idling
– When the vehicle is being towed
– When the vehicle is being carried on a
car carrier
– When the vehicle is being operated on
a race track
– When there is vinyl curtains or pendu-
lous branches in front of the vehicle
– When driving in the field covered with
grown grass
– When using an automatic car washer
– When the vehicle is placed upon a car
elevator or placed in a mechanical
parking lot
– With a spare tyre or snow chains
equipped
– When you have a temporarily repaired
flat tyre
– When you have an accident or break-
down
– When the automatic brake system is
activated frequently
– When tyres are not inflated to the rec-
ommended tyre pressure
– With worn tyres equipped
– With non-specified sized tyres or
wheels equipped
– With a modified suspension equipped
– When attaching an item which inter-
feres with the visibility of the dual sen-
sor
– When the vehicle is being weighed
down by heavy items
– When the vehicle is used to tow a
trailer
78RB03010
(2)
(1)
Summary of Contents for Jimny
