Supero SUPER P6DGH, User Manual

Page: 54 / 113

2-27
Chapter 2: Installation
2-6 Installing/Removing SIMM/DIMM Modules
The SUPER P6DGH can accommodate a maximum of 2 GB Regis-
tered DIMM supported or 1 GB SDRAM DIMMs. It has 4 168-pin 3.3V
unbuffered DIMM slots. It is not recommended to mix EDO DIMM
modules with SDRAM DIMM modules.
There are three types of EDO and SDRAM DIMM modules: x4, x8
and x16. If you are using the x4 type, you can populate the DIMM
slots with either 4 single-sided or 2 double-sided memory mod-
ules. For memory configurations of 512 MB EDO DIMMs or higher,
it is recommended to use x8 or x16 types of memory.
There are no jumpers needed to configure the onboard memory.
EDO memory must be 70ns or faster. Refer to Figure 2-7 and the
instructions below for installing or removing DIMM modules.
CAUTION
Exercise extreme care when installing or removing
SIMM/DIMM modules to prevent any possible damage.