Supero SUPER P6DGH, User Manual

Page: 29 / 113

2-2
SUPER P6DGH User’s Manual
3. Slide a black plastic support onto each end of the fan/heat sink
making sure that the hole and clip are on the outside edge of the
support. If the supports are reversed, the holes will not line up with
the pegs on the motherboard. Slide each support toward the center
of the processor until the support is seated in the outside groove in
the fan housing.
Figure 2-2. Support for Fan/Heat Sink
Top of processor
Groove in fan housing
Hole and clip on outside edge