Supero SUPER P6DGH, User Manual

Page: 75 / 113

Chapter 5: Running Setup
5-1
Chapter 5
Running Setup
The WinBIOS Setup options described in this section are selected by
choosing the appropriate high-level icon from the Standard Setup screen.
All icons displayed are described in this section, although the on-screen
display is often all you need to understand how to set the options.
Optimal and Fail-Safe default settings are in bold text unless otherwise
noted.
5-1 Setup
Standard Setup
Pri Master
Pri Slave
Sec Master
Sec Slave
Select these options to configure the drive specified in the option. Select
Auto Detect IDE to let AMIBIOS automatically configure the drive. A
screen with a list of drive parameters then appears. Click on OK to
configure the drive.
T y p e How to Configure
SCSI Select Type. Select Not Installed on the drive
parameter screen. The SCSI drivers provided by
the SCSI manufacturer should allow you to configure
the SCSI drive.
IDE Select Type. Select Auto to let AMIBIOS determine the
parameters. Click on OK when AMIBIOS displays the
drive parameters. Select LBA Mode. Select On if the
drive has a capacity greater than 540 MB. Select the
Block Mode. Select On to allow block-mode data
transfers. Select the 32-bit mode. Select On to allow
32-bit data transfers. Select PIO mode. Select On
to allow AMIBIOS to determine the PIO Mode. It