Supero SUPER P6DGH, User Manual

Page: 32 / 113

2-5
Chapter 2: Installation
Installation of the Universal Retention Mechanism
(URM)*
Please Note! Screws and washers attach from the bottom of
the board and must be installed before mounting the board to
the chassis. (See Figures 2-5 and 2-6)
1. When Installing the URM be sure the Left (L) and the Right (R)
sides are placed accordingly.
2. Lift both arms upright and slide the processor into the socket,
noting that the notches need to line up.
*These directions may not apply to second source URMs
Top view of Celeron cap
R
Tab
Note notch in socket
Screw holes for
retention
mechanism
Supero
L R
R
L
URM with arms folded
Note: Left and Right arms are defined
Figure 2-5. URM and Celeron Installation