Supero SUPER P6DGH, User Manual

Page: 93 / 113

Chapter 5: Running Setup
5-19
CPU Overheat Warning
The settings for this option are Enabled or Disabled. When set to
Enabled, this option allows the user to set an overheat warning tempera-
ture.
CPU Overheat Warning Temperature
Use this option to set the CPU overheat warning temperature. The
settings are 25°C through 75°C in 1°C intervals. Note: The Optimal
and Fail-Safe default settings are 55°C.
H/W Monitor In0 (CPU 1)
H/W Monitor In1 (CPU 2)
H/W Monitor In2 (+3.3V)
H/W Monitor In3 (+5V)
H/W Monitor In4 (+12V)
H/W Monitor In5 (-12V)
H/W Monitor In6 (-5V)
CPU1 Fan
CPU2 Fan
Thermal Control Fan
The above features are for PC Health Monitoring. Motherboards with
W83781D have seven onboard voltage monitors for the CPU core, the
CPU I/O, +3.3V, +5V, -5V, +12V and -12V, and three fan-status monitors.
Onboard FDC
This option enables the FDC (Floppy Drive Controller) on the motherboard.
The settings are Auto (AMIBIOS automatically determines if the floppy
controller should be enabled), Disabled or Enabled.
Onboard Serial PortA
This option specifies the base I/O port address of serial port 1. The
settings are Auto (AMIBIOS automatically determines the correct base I/O
port address), Disabled, 3F8h/COM1, 2F8h/COM2, 3E8h/COM3 or 2E8h/
COM4.
Onboard Serial PortB
This option specifies the base I/O port address of serial port 2. The
settings are Auto (AMIBIOS automatically determines the correct base I/O
port address), Disabled, 3F8h/COM1, 2F8h/COM2, 3E8h/COM3 or 2E8h/
COM4.