Supero SUPER P6DGH, User Manual

Page: 94 / 113

BIOS User's Manual
5-20
Serial PortB Mode
The settings for this option are Normal, IrDA or ASK IR. When set to
IrDA, the IR Duplex Mode becomes available and can be set to either Half
or Full. When set to ASK IR, the IrDA Protocol becomes available and
can be set to 1.6 us or 3/16.
Onboard Parallel Port
This option specifies the base I/O port address of the parallel port on the
motherboard. The settings are Auto (AMIBIOS automatically determines
the correct base I/O port address), Disabled, 378, 278 or 3BC.
Parallel Port Mode
This option specifies the parallel port mode. The settings are Normal, Bi-
Dir, EPP or ECP. When set to Normal, the normal parallel port mode is
used. Use Bi-Dir to support bidirectional transfers. Use EPP (Enhanced
Parallel Port) to provide asymmetric bidirectional data transfer driven by
the host device. Use ECP (Extended Capabilities Port) to achieve data
transfer rates of up to 2.5 Mbps. ECP uses the DMA protocol and
provides symmetric bidirectional communication. Note: The Optimal
default setting for this option is ECP and the Fail-Safe setting is
N o r m a l .
EPP Version
The settings are 1.7 or 1.9. Note: The Optimal and Fail-Safe default
settings are N/A.
Parallel Port IRQ
This option specifies the IRQ to be used by the parallel port. The settings
are Auto, 5 or 7.