Supero SUPER P6DGH, User Manual

Page: 46 / 113

2-19
Chapter 2: Installation
Overheat LED
Refer to Table 2-19 to connect an LED to JOH1 to indicate an over-
heat warning.
Table 2-19. Overheat LED Pin Definitions
Pin Number Function
1 +12 V
2 Signal
Buzzer Overheat Notification
Refer to Table 2-20 for setting BZ_ON to either enable or disable
buzzer BZ1 as an overheat warning.
Table 2-20. Buzzer Enable Jumper Settings
Jumper
Position Function
ON Enable Buzzer
OFF Disable Buzzer
Chassis Intrusion Connector
The Chassis Intrusion Detection feature is described on page 1-9.
Refer to Table 2-21 for its connector pin definitions on JL1.
Table 2-21. Chassis Intrusion Pin Definitions
Pin
Number Function
1 Intrusion Input
2 Ground