Supero SUPER P6DGH, User Manual

Page: 19 / 113

1-9
Chapter 1: Introduction
CPU Fan Auto-Off in Sleep Mode
The CPU fan(s) runs when the power is on, but can be turned off
when the CPU is in sleep mode. When in sleep mode, the CPU
does not run at full power and therefore generates less heat. For
power saving purposes, the user has the option of shutting down
the CPU fan(s) at such times.
System Overheat Alarm and LED
This feature is available when used with SUPERMICRO's SUPER
Doctor Utility. The program will generate a beep sound via the
speaker when it detects a system overheat condition. The overheat
condition can be defined by the user. The program can also give an
on-screen indication when the system overheats.
Chassis Intrusion Detection
The chassis intrusion circuitry can detect unauthorized intrusion to
the system. The chassis intrusion connector is located on JL1.
Attach a microswitch to JL1. When the microswitch is closed, it
means that the chassis has been opened. The circuitry will then
alert the user with a warning message when the system is turned
on. This circuitry uses the onboard battery for power.
System Resource Alert
This feature is available when used with the Intel LANDesk Client
Manager. It is used to notify the user of certain system events. For
example, if the system is running low on virtual memory, there might
not be enough hard drive space to save the data. LDCM will then
alert the user of the potential problem.