Sun Oracle X3-2, Installation Manual

Page: 33 / 182

21
Installing the Server Into a Rack
This section describes how to install the server into a rack using the rail assembly in
the rackmount kit. Perform these procedures if you purchased the rail assembly.
Related Information
■
“About the Installation Procedure” on page 1
■
“Preparing for Server Installation” on page 17
Description Links
Complete all installation
prerequisite tasks. “Installation Prerequisites” on page 22
Check that your rack meets the
requirements for installation of this
server. “Rack Requirements” on page 22
Review safety precautions. “Safety Precautions When Rackmounting the
Server” on page 23
Verify that you have received all
components of the rackmount kit. “Rackmount Kit Contents” on page 24
Stabilize the rack. “Stabilize the Rack for Installation” on page 25
Install mounting brackets onto the
server. “Install Mounting Brackets” on page 26
Mark the rackmount location. “Mark the Rackmount Location” on page 28
Attach the tool-less slide-rail
assembly to the rack. “Attach Tool-less Slide-Rail Assemblies” on page 29
Install the server into the slide-rail
assembly. “Install the Server Into the Slide-Rail Assemblies”
on page 32
(Optional) Install the cable
management arm for routing server
cables. • “Install the Second-Generation Cable
Management Arm” on page 35
• “Remove the Second-Generation Cable
Management Arm” on page 46
• “Install the First-Generation Cable Management
Arm” on page 50