Sun Oracle X3-2, Installation Manual

Page: 143 / 182

Configuring the Preinstalled Oracle Solaris 11 Operating System 131
Oracle Solaris Configuration Worksheet
Before you begin configuring the operating system, use the configuration worksheet
in the following table to gather the information that you will need. You need to
collect only the information that applies to your application of the system.
TABLE:
Worksheet for Oracle Solaris Operating System Configuration
Information for Installation Description or Example
Your Answers:
Defaults (*)
Language Select from the list of available languages
for the OS. English*
Locale Select your geographic region from the list
of available locales.
Terminal Select the type of terminal that you are
using from the list of available terminal
types.
Network connection Is the system connected to a network? • Networked
• Non-networked*
DHCP Can the system use Dynamic Host
Configuration Protocol (DHCP) to configure
its network interfaces? • Yes
• No*
If you are not
using DHCP,
note the network
address: IP address If you are not using DHCP, supply the IP
address for the system.
Example: 192.0.2.1
Subnet If you are not using DHCP, is the system
part of a subnet?
If yes, what is the netmask of the subnet?
Example: 10.255.255.255
IPv6 Do you want to enable IPv6 on this
machine? • Yes
• No*
Host name Choose a host name for the system.
Kerberos Do you want to configure Kerberos security
on this machine?
If yes, gather this information:
Default realm:
Administration server:
First KDC:
(Optional) Additional KDCs: • Yes
• No*