Sun Oracle X3-2 Installation Manual Download Page 159

Page: 159 / 182

Configuring the Preinstalled Oracle VM 3.x Software

147

Note –

To pause at the GRUB menu, press any key other than Enter. Then select the

option you want to use and press Enter to continue.

4. From the GRUB menu, use the up and down arrow keys to select the display

option, and then press Enter.

Note –

The menu offers two choices: one for normal booting, and one for serial

console enabled booting.

Options include:

■

To display the default option,

select the first option in the list and press Enter:

Oracle VM Server - ovs (xen-4.0.0 2.6.32.21-41ovs)

■

To display output to the serial port,

select the second option in the list and

press Enter:

Oracle VM Server - ovs serial console (xen-4.0.0

2.6.32.21-41ovs

)

5. As the configuration process continues, the following screen appears:

Summary of Contents for X3-2























































































































































































Search results

Summary of Contents for X3-2

Reviews:

Sun Oracle X3-2, Installation Manual, Page: 159 / 182

Search results

Summary of Contents for X3-2

Reviews: