Sun Oracle X3-2 Installation Manual Download

Page: 80 / 182

Sun Server X3-2 Installation Guide • April 2014

3. Type your user name and password.

Note –

To enable first-time login and access to Oracle ILOM, a default Administrator

account and its password are provided with the system. To build a secure
environment, you must change the default password (

changeme

) for the default

Administrator account (

root

) after your initial login to Oracle ILOM. If this default

Administrator account has since been changed, contact your system administrator for
an Oracle ILOM user account with Administrator privileges.

4. Click Log In.

The System Information Summary page appears.

You are now logged in to the server’s Oracle ILOM. For information about using
Oracle ILOM, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.1
Documentation Library at

http://www.oracle.com/pls/topic/lookup?ctx=ilom31

Summary of Contents for X3-2























































































































































































Search results

Summary of Contents for X3-2

Reviews:

Related manuals for X3-2

Brands by name

Popular brands

Sun Oracle X3-2, Installation Manual

Search results

Summary of Contents for X3-2

Reviews:

Related manuals for X3-2

Brands by name

Popular brands