Sun Oracle X3-2, Installation Manual

Page: 55 / 182

Installing the Server Into a Rack 43
FIGURE:
CMA Fully Extended
15. To return the server to the rack, perform the following steps:
a. Simultaneously pull and hold the two green release tabs (one on each side of
the server) toward the front of the server (see the following figure) while you
push the server into the rack. As you push the server into the rack, verify that
the CMA retracts without binding.
Note –
To pull the green release tabs, place your finger in the center of each tab, not
on the end, and apply pressure as you pull the tab toward the front of the server.