Sun Oracle X3-2 Installation Manual Download Page 123

Page: 123 / 182

Configuring Server Drives for OS Installation

111

■

“Configure RAID in Legacy BIOS Boot Mode With the Sun Storage 6 Gb SAS PCIe
Internal HBA” on page 113

▼

Configure RAID in UEFI Boot Mode With the Sun
Storage 6 Gb SAS PCIe Internal HBA

1. Power on or reset the server.

For example, to reset the server:

■

From the local server

, press the Power button (approximately 1 second) on the

front panel of the server to power off the server, and then press the Power
button again to power on the server.

■

From the Oracle ILOM web interface

, select Host Management > Power

Control, and then select Reset from the Select Action list box.

■

From the Oracle ILOM CLI

, type:

reset /System

The BIOS screen appears.

2. When prompted in the BIOS screen, press F2 access the BIOS Setup Utility.

After a few moments, the BIOS Setup Utility appears.

3. Use the right arrow key to navigate to UEFI Driver Control menu.

The UEFI Driver Control menu appears.

Summary of Contents for X3-2























































































































































































Search results

Summary of Contents for X3-2

Reviews:

Related manuals for X3-2

Brands by name

Popular brands

Sun Oracle X3-2, Installation Manual

Search results

Summary of Contents for X3-2

Reviews:

Related manuals for X3-2

Brands by name

Popular brands