Sun Oracle X3-2, Installation Manual, Page: 158 / 182

146 Sun Server X3-2 Installation Guide • April 2014
Are you sure you want to start /System (y/n)? y
Starting /System
■
To reset the server, use one of the following methods:
■
From the Oracle ILOM web interface,
click Host Management > Power
Control, and in the Select Action list box, click Reset.
■
From the Oracle ILOM CLI , type the following command from the prompt:
-> reset /System
When prompted, enter
y
to confirm:
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System
The server begins the boot process.
3. Start the Remote Console application using one of the following methods.
■
From the Oracle ILOM web interface, click Remote Control > Launch Remote
Console.
■
From the Oracle ILOM CLI,
type the following command at the CLI prompt:
-> start /HOST/console
When prompted, type
y
to confirm:
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
After the server boots, the GRUB menu appears.
From the GRUB menu, you can choose whether you want to continue to direct the
display to the serial port, or whether you want to direct the display to a device
connected to the video port.