Sun Oracle X3-2, Installation Manual

Page: 79 / 182

Connecting to Oracle ILOM 67
■
“Determining the IP Address of the Server SP” on page 67
■
“Log In to Oracle ILOM Remotely Using the Web Interface” on page 67
■
“Log In to Oracle ILOM Remotely Using the Command-Line Interface” on page 69
■
“View or Modify an SP IPv4 Address” on page 70
■
“View or Modify an SP IPv6 Address” on page 73
Determining the IP Address of the Server SP
If a DHCP server or IPv6 router cannot be reached after ten seconds, the SP requests
will timeout. After the timeout, the SP then only periodically checks for a DHCP
server or IPv6 router.
If you do not have a DHCP server or IPv6 router on your network, or you need to
view or assign an IP address to the SP, follow the procedures in these sections:
■
“View or Modify an SP IPv4 Address” on page 70
■
“View or Modify an SP IPv6 Address” on page 73
▼
Log In to Oracle ILOM Remotely Using the Web
Interface
This procedure requires that you have an Oracle ILOM Administrator account and
that you know the IP address or host name of the server SP.
To improve response times, disable the web browser proxy server (if used).
1. To ensure that your server has the necessary connections for remote access to
Oracle ILOM, follow the instructions in “Attaching Data Cables and Power
Cords to the Server” on page 60 .
2. Type the IP address of the server’s SP into your web browser address field.
For example:
https://198.51.100.26
The Oracle ILOM web interface login page appears.