Sun Oracle X3-2 Installation Manual Download Page 149

Page: 149 / 182

137

Configuring the Preinstalled Oracle
Linux 6.

Operating System

This section describes how to configure the Oracle Linux 6.

operating system (OS)

that is preinstalled on your server, if ordered. The preinstalled OS image contains all
of the necessary drivers for your server.

Note –

For more up-to-date information about available versions of the preinstalled

Oracle Linux operating system, see the

Sun Server X3-2 Product Notes

at:

http://www.oracle.com/pls/topic/lookup?ctx=SunServerX3-2

Related Information

■

“Installation Procedure Overview” on page 2

Oracle Linux 6.x Configuration
Worksheet

Gather the following information and have it ready when you begin the
configuration process. You need to collect only the information that applies to your
organization and network environment.

Description

Links

Gather the information you will need
during the configuration process.

“Oracle Linux 6.x Configuration Worksheet”
on page 137

Configure the preinstalled Oracle Linux
OS.

“Configure the Preinstalled Oracle Linux 6
Operating System” on page 138

Update and register the Oracle Linux
operating system.

“Register and Update Your Linux Operating
System” on page 141

Summary of Contents for X3-2























































































































































































Search results

Summary of Contents for X3-2

Reviews:

Related manuals for X3-2

Brands by name

Popular brands

Sun Oracle X3-2, Installation Manual

Search results

Summary of Contents for X3-2

Reviews:

Related manuals for X3-2

Brands by name

Popular brands