Sun Microsystems Sun Fire X2100 M2, Service Manual

Page: 5 / 128

Contents v
4.1 Tools and Supplies Needed 4–1
4.2 Installation Precautions 4–2
4.2.1 ESD Precautions 4–2
4.2.2 Preinstallation Instructions 4–2
4.2.3 Postinstallation Instructions 4–3
4.3 Powering Off the Server and Removing the Cover 4–3
4.4 Locations of Server Components 4–5
4.5 Component Replacement Procedures 4–6
4.5.1 Replacing the I/O Board 4–7
4.5.1.1 Removing the I/O Board 4–7
4.5.1.2 Installing the I/O Board 4–8
4.5.2 Replacing the PCIe Card and Riser Assembly 4–9
4.5.2.1 Removing the Riser Assembly and PCIe Card 4–9
4.5.2.2 Installing the PCIe Card and Riser Card Assembly 4–
10
4.5.3 Replacing a Hard Disk Drive and Carrier 4–12
4.5.3.1 Removing an HDD and Carrier 4–12
4.5.3.2 Installing an HDD and Carrier 4–13
4.5.4 Installing a LSI PCIe Card and Cables 4–14
4.5.4.1 Installing the LSI Card to Support SAS Hard Drive
Installation
4–14
4.5.4.2 Installing the LSI Card to Support SATA RAID 4–17
4.5.5 Removing and Installing an ODD Drive Assembly 4–19
4.5.5.1 Removing an ODD Drive Assembly 4–20
4.5.5.2 Installing the ODD Drive Assembly 4–21
4.5.6 Replacing an Air Duct 4–22
4.5.6.1 Removing the Air Duct 4–22
4.5.6.2 Installing the Air Duct 4–23
4.5.7 Replacing the Power Supply 4–24