Sun Microsystems Sun Fire X2100 M2, Service Manual

Page: 77 / 128

Chapter 4 Maintaining the Sun Fire X2100 M2 Server 4-31
4.5.10 Replacing Memory Modules
The following procedure describes how to remove and or install dual inline memory
modules (DIMMs).
4.5.10.1 DIMM Population Rules
Note – Keep in mind the following information and rules when you use the
procedures in this section to replace or add DIMMs to the server.
■
Four unbuffered DDR2 DIMMs are supported.
■
DIMM 0 is farthest from the CPU.
■
Populate the slots in order from slot 0 to slot 3.
4.5.10.2 Removing a DIMM
To remove a DIMM:
1. Power off the system and remove the cover as described in Section 4.3, “Powering
Off the Server and Removing the Cover” on page 4-3 .
2. Locate the DIMM connector in which you will install or replace a memory
module.