Sun Microsystems Sun Fire X2100 M2, Service Manual

Page: 36 / 128

3-10 Sun Fire X2100 M2 Server Service Manual • December 2006
■
Save Burn-in Script
To save a burn-in script that you have created, enter
d:\
testname
.tst
Where testname is the name of the script that you have created.
■
Change Options
Opens the Burn-in Options menu, which enables you to modify the various
options listed in
TABLE 3-3
for the currently loaded test script.
■
Select Tests
Opens a listing of all the possible types of tests available for you to run for the
currently loaded test script.
3.6 Create Diagnostic Partition Option
The diagnostic partition is preinstalled on the Sun Fire X2100 M2 server. You need to
reinstall the diagnostic partition only if you have reformatted your hard drive. Using
the Erase Primary Boot Hard Disk utility on the Sun Fire X2100 M2 Server Tools and
Drivers CD preserves the diagnostic partition.
The Create Diagnostic Partition option installs a diagnostic partition on the first
bootable disk seen by the Sun Fire X2100 M2 server. The first bootable disk is on the
primary/master SATA device.
Note – If you are running the Pc-Check Diagnostics software from a PXE server, you
do not need to follow the instructions in these procedures for inserting the Tools and
Drivers CD into the DVD tray.
The following sections explain how to create and access the diagnostic partition on
the Sun Fire X2100 M2 server:
■
Section 3.6.1, “Removing Existing Partitions From a Hard Disk” on page 3-11
■
Section 3.6.2, “Adding a Diagnostic Partition to the First Bootable Disk” on
page 3-12
■
Section 3.6.3, “Creating a Log File on the Diagnostic Partition” on page 3-12
■
Section 3.6.4, “Accessing the Diagnostic Partition on a Red Hat Linux System” on
page 3-13
■
Section 3.6.5, “Accessing the Diagnostic Partition on the Solaris 10 Operating
System” on page 3-15
■
Section 3.6.6, “Accessing the Diagnostic Partition on the Windows Server 2003
Operating System” on page 3-16