Sun Microsystems Sun Fire X2100 M2, Service Manual

Page: 20 / 128

1-10 Sun Fire X2100 M2 Server Service Manual • December 2006
1.4.4 Clearing the CMOS
You can use this procedure to clear the server's CMOS settings in the case of a
system hang.
For example, if the server hangs because of incorrect settings and will not boot, use
this procedure to invalidate the settings and reboot with the default settings.
1. Remove the AC power cord.
See
FIGURE 1-2
for the location of the power cord connection.
2. Remove the battery for 30 seconds, then reinsert it.
See Chapter 4 for instructions on removing and replacing the battery.
3. Reinsert the AC power cord.
1.5 Customer-Orderable Components
You can order additional components and replacement parts for the Leo server.
Contact your local Sun sales representative for more information. For the most up-
to-date component information, see the components list on one of the following web
sites:
http://sunsolve.sun.com/handbook_pub/Systems/